Main Menu; Querying Outputs And Yields - Steca Grid Vision 1800 Manuel

EN
9

Main menu

9.1

Querying outputs and yields

Note
In a system with many inverters the large data volume can result in delays of up to 30 s
when switching between the various displays described below.
9.1.1 Power
734.144 | Z04 | 2012-11-22
Pressing the SET button in the System daily yield or
Inverter daily yield screens will bring you to the main
menu. You navigate through the menu entries using
the UP and DOWN buttons. Pressing the SET button
displays the submenu of the currently selected main
menu entry. Pressing the ESC button brings you back
to the menu level above. Pressing the ESC button
in the main menu will return you to the System or
Inverter screen.
The Power submenu allows you to display the output
of the entire system or individual inverters
1)
Only in systems with more than 1 inverter
System
This screen shows the total output of the system by
summing the output of all inverters. This corresponds
to the output value displayed in the System screen.
Inverter
This screen shows the output of the selected inverter.
You can now use the UP and DOWN buttons to select
each inverter in turn.
.
1)
41