Cable Connections; Function; Operating Buttons - Steca Grid Vision 1800 Manuel

EN
6.1.3

Cable connections

Up to 20 inverters can be connected to the remote display. Communication between the
remote display and the inverters takes place using a wired connection over an RS485
bus. More information is provided in the inverter manual.
6.2

Function

6.2.1

Operating buttons

Button
 (UP button)
SET
ESC
 (DOWN but-
ton)
Tab. 4: Functions of the operating buttons
6.2.2 Settings
• Date / time of the internal clocks of the remote display and inverters
• Country: Setting the country also defines the local regulations for feeding electric-
ity into the mains grid. This setting affects all connected inverters and, due to mains
grid feed safety regulations, this setting can be performed only once.
• Addresses of the inverters
• Language used for displaying text messages in the remote display
• Contrast / illumination of the display
6.2.3 Display
The following information stored in the inverters can be read on the remote display:
• Output and yields
– of all inverters
– of individual inverters
• Numerical and graphical display
734.144 | Z04 | 2012-11-22
Function
• scrolling up through the menu
• increases a selected value
• enters a selected submenu
• confirms an entered setting
• jumps one menu level upwards
• discards an entered setting
• scrolling down through the menu
• decreases a selected value
35