Messages; Error Messages - Steca Grid Vision 1800 Manuel

EN
11

Messages

11.1

Error messages

Error messages are generated either by the inverters or the remote display and are
displayed as follows:
11.1.1 Error message types
There are 3 types of error message:
• Type Information I
The inverter has detected an error that does not affect the feed-in process. The user
must take action to correct the error.
• Type Warning W
The inverter has detected an error that may result in reduced yields. It is highly rec-
ommended that you correct the cause of the error.
• Type Error E
The inverter has detected a serious error. No electricity is being fed into the mains
grid. The user must inform the customer service.
11.1.2 Handling of error messages
• Messages relating to minor errors disappear as soon as the error is no longer pre-
sent.
• Serious errors are (permanently) displayed until they are confirmed by pressing the
SET button; see the right column in Tab. 5, p. 50 onwards.
• If an already confirmed error recurs then it is displayed again.
734.144 | Z04 | 2012-11-22
49