Installation; Mounting Method; Deinstallation - Steca Grid Vision 1800 Manuel

EN
5

Installation

5.1

Mounting method

Caution
• Risk of electrical shock and fire if mounted in a damp environment!
The mounting location must conform to the protection degree of the device; see
Section 12, p. 54.
• Danger of bodily injury and damage to the casing when drilling!
Do not use the casing as a drilling template.
1. Choose a suitable installation site.
2. Drill the upper fastening hole.
3. Screw in the screw.
4. Hang the case in the recess  and align it correctly.
5. Mark the position of the lower fastening holes ‚ / ƒ.
6. Remove the case.
7. Drill the lower fastening holes.
8. Hang the casing in the recess .
9. Screw the case firmly using the lower fastening holes ‚ / ƒ.
5.2

Deinstallation

 To deinstall the remote display, follow the installation instructions in the reverse
order. If necessary re-terminate the data bus.
734.144 | Z04 | 2012-11-22
1
2
3
33