GENERAL INSTRUCTIONS
The refrigerating unit is manufactured by respecting the regulations 73/23/CEE (low voltage), 89/336/CEE
(electromagnetic compatibility) and the subsequent modifications.
Read carefully the labels on the unit, do not cover them for any reason and replace them immediately if they
are damaged.
Do not store inflammable materials near the unit.
Do not remove the protections or the panels that have to be taken off with tools.
Do not use the unit in an explosive atmosphere.
Do not wash the unit with direct or under pressure water jets, or with noxious substances.
Do not put liquid containers on the unit.
Place the unit far from sources of heat and of moisture.
Pay attention not to damage the supply cable by bending, crushing or stress.
Do not use the unit if the supply cable is damaged.
The unit does not cause harmful vibrations; they are anyway below 2,5 m/s2 on the superior limbs and 0,5
m/s2 on the other parts of the body. In normal conditions, the unit does not cause harmful vibrations to the
surroundings. The greatest vibrations are caused by the compressor; for this reason all the compressors,
installed on our units, are provided with shock absorber feet (silent block or other similar methods) and they
are connected to the refrigerating circuit through flexible pipes.
Do not turn off the water interception tap while the unit is working.
Pay attention to children and other people in the working area.
In case of fire use a dry-chemical extinguisher.
If during the work, unexpected problems crop up, act immediately on the main switch, which is on the
switchboard of the unit.
Take the unit to the place of work; control if all the details concerning the installation have been arranged i.e.
electric supply: holes in the walls for the units or for the drainpipes, the eventual unions for the water feed line.
The label identifying the unit is on the right side of the condensing unit, in the corner high above on the left.
www.combisteel.com
4