ESAB KHM 525 PS Emploi Et Entretien page 55

M ING
PA T
MAINTENANCE
aintenance refers to all operations regarding the control
and replacement of mechanical and electrical parts subject to
wear. In addition it refers to the control and topping up or
replacement of fluids such as fuel, and the regular cleaning of
the machine.
Repairs refers to the substitution of worn or damaged parts
and repairs should be carried out by
enters.
Refer to the Engine
maintenance instructions for the engine. eriodic maintenance
should be performed according to the schedule shown in this
manual.
n a regular basis check that there are no obstructions in the
aspiration exhaust ducts of the alternator, the engine or the
housing which could restrict the flow of cooling air.
MAINTENANCE
Have personnel do maintenance and troubleshooting work.
●
Stop the engine before doing any work inside the machine. If for any
●
reason the machine must be operated while working inside,
moving parts, hot parts exhaust manifold and muffler,
etc. electrical parts which may be unprotected when the machine
is open.
Remove guards only when necessary to perform maintenance, and
●
replace them when the maintenance requiring their removal is
complete.
Use suitable tools and clothes
●
Do not modify the components if not authori ed.
●
THE MACHINE
uthori ed Service
anufacturer s anual for the
ARN N
.
KHM
H T
M
43