ESAB KHM 525 PS Emploi Et Entretien page 44

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BATTE
to the pole
battery after having taken
away the protection , by
properly tightening the clamp.
from the colour of the warning light which is in the
upper part.
reen colour battery
lack colour battery to be recharged
hite colour battery to be replaced
N T
PEN THE BATTE
UB ICANT
heck the level of the engine oil using the
ASTINA LIVELLO
OLIO
MAX
oil dipstick. he level should be between
LIVELLO
OPERATIVO
the minimum and maximum marks. lf
MIN
necessary, add more oil.
If the air filter is of the oil bath type, fill it with the
same oil up to the level indicated on the filter.
EC MMEN E
AE
or the type and viscosity of oil refer to owner s
manual for the engine supplied with the machine .

NOTE: Before starting the engine read the instructions
in the owner's manual for the engine.
PREPARING THE UNIT (DIESEL ENGINES)
ITH UT MAINTENANCE
onnect the cable
positive
positive of the
heck the state of the battery
.
I C
IT
G A E
KHM
UE
ill the tank with good quality diesel fuel.
ATTENTI N Diesel fuel is highly
inflammable before filling the tank, stop the
engine. Do not fuel in the presence of open
flames.
If fuel is spilled on the engine, clean it
immediately before starting up the engine.
C
ING I UI
our the cooling liquid through the hole
top of the radiator until it reaches the opening. or
the type of cooling liquid to be used and for
maintenance of the cooling system, refer to the
engine manual.
G
UN
C NNECTI N
good ground is obligatory for all models with
ground fault interrupter
circuit breaker .
hese protective devices will not
protect the operator unless there is a good ground.
Use a good quality ground cable and connect it
to the grounding point of the machine
ollow all local rules and or regulations in force.
achines with Isometer protection do not need to
be grounded.
nce the above operations have been completed,
the machine can be used.
M
20
at the
E
earth leakage
.
I

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

803 serie

Table des Matières