ESAB KHM 525 PS Emploi Et Entretien page 38

The accessory cannot be removed from the machine and used separately (actioned manually or following vehicles) for the
transport of loads or anyway for used different from the machine movements.
TRAILERS
The machines provided for assembling the accessory (slow towing trolley) can be towed up to a maximum speed of 40 Kms
hour on asphalted surfaces.
Towing on public roads or turnpikes of any type IS EXCLUDED, because not in possesion of the requirements by national and
foreign traffic norms.
Nota : Lift the machine and assemble the parts as shown in the drawing
For assembling the generating set on the trolley please keep
to following instructions:
1) - Lift the generating set (by means of suitable hook).
6) - Assemble on the machine the towbar (5) complete of
foot with the M10x20 screws, nuts and washers.
7) - Assemble the axle (7) to the base of the machine (see
fig. page M6.3) with the M10x25 screws and relative
washers (two per part) so that their supports coincide.
8) - Insert the wheel (9) on the axle then screw the self
blocking nuts (8).
9) - Pump the tyre (9) bringing the pressure to four atms.
10) - Lower the machine to the ground and place the parking
foot definitively (regulating at the best height).
ATTENTION
Do not substitute the original tires with other types.
ASSEMBLY OF SITE TOW FOR KHM 525
ATTENTION
9
7
M
6.3
8