ESAB KHM 525 PS Emploi Et Entretien page 48

fter having prepared the machine charged the
battery, put in oil and fuel the machine is ready for
operation.
efore starting the engine please note the following
• he welder should only be operated by qualified
personnel with experience in working with engine
driven welders.
• heck the oil level daily. uel should be put in
before starting the engine.
• efore using the welder or the auxiliary power let
the engine warm up and before stopping the engine
let it run without load to cool down.
Refer to the following instructions regarding the
function of the various controls on the front panel.
C I
OPERATING
KHM 525 PS
Eng ine
prot ecti
on
M
32