Setup Requirements; Charging The Parent Unit (10 Hours) - Angelcare AC115 Manuel Du Propriétaire

SETUP REQUIREMENTS

INCLUDED:
Parent Unit
6 Pre-threaded cord covers
with Split USB cable
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm (1/4")
Minimum dimensions:
33 x 33 cm (13" x 13")
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger than
the Sensor Pad surface.
STEP 1 - CHARGING THE PARENT UNIT (10 HOURS)
1
4
Nursery Unit
AC adapter
(for Parent Unit)
Hardboard
Battery
compartment
2
Model AC115
Baby Breathing Monitor
with Sound
Tabletop stand
(for Nursery Unit)
2X
2 Rechargeable AAA Batteries
(for Parent Unit)
WHAT YOU WILL NEED (NOT INCLUDED):
2X
2 AAA Alkaline
Batteries
(for Nursery Unit)
1) Remove the battery compartment
on the rear. Insert the provided
rechargeable batteries into the
10
compartment.
3
2) Connect the USB plug to the
Parent Unit.
3) Connect the power adapter to an
electrical outlet.
4) Charge the unit for
10 continuous hours prior
to first use.
Wired Movement Sensor Pad
* Always place Angelcare logo side up *
®
AC adapter
(for Nursery Unit)
Miniature Philips
Screwdriver