Removal Of Furnace From Base Of Skid - Napoleon HYBRID 150 Mode D'emploi

4.3

rEmOvAL OF FurNACE FrOm BASE OF SkId

HiGH CenTre of GrAviTy! uSe exTreme CAuTion To Avoid ToPPlinG of THe furnACe
STEp #1:
Push the furnace to one side until close to the weight tipping the skid.
inSTAller #1
STEp #2:
firmly support side of the furnace (near top) to
prevent furnace toppling, when the skid/furnace are
tilted.
LOOSEN OFF LOCK NUT
ADJUSTMENT FOOT
CAUTION
"CruSH HAzArd"!
inSTAller #2
STEp #3:
Pull the skid from under the unit, and gently tilt the
furnace upright onto the levelling feet.
HiGH CenTre
of GrAviTy
2nd inSTAller
SuPPorTS
WeiGHT of uniT
from ToP
USE ExTREME
CAUTION TO AvOID
TOppLINg OF UNIT,
"CRUSH HAzARD".
SECURING BRACKET
REMOVE LAG BOLT
BASE SKID
inSTAller #1
11
FURNACE BASE
inSTAller #2
W415-1013 / A / 06.05.12