Hybrid Hmf150/200 As A Combination "Wood/Oil" Furnace - Napoleon HYBRID 150 Mode D'emploi

5.3

HyBrId HmF150/200 AS A COmBINATION "wOOd/OIL" FurNACE

THE INSTALLATION OF THE WOOD OIL COMBINATION FURNACE MUST BE DONE IN ACCORDANCE
WITH THE RULES OF THE AUTHORITIES HAvINg jURISDICTION AND THE CAN / CSA B139-09
required ComPonenTS:
• Hmf150/200 Hybrid furnace
• Hmfk-bmP50 blower box module
• Hmfk-ofrf40 or Hmfk-ofbnx oil
burner module
STEpS #1 - #9
Follow Steps 1 to 9 from SECTION 5.2 - HYBRID HMF150/200 AS A "STAND ALONE" WOOD FURNACE.
STEp #10
○ remove the contents of the oil burner module kit (Hmfk-ofrf40 or Hmfk-ofbnx) and compare with
the contents list on the "manual" Addendum accompanying the oil furnace module.
STEp #11
○ remove (6) hex head screws fastening the bot-
tom front panel to the front corner post and pull
the bottom front panel off Hmf150/200 furnace
assembly.
STANDARD FOR OIL BURNINg HEATINg AppLIANCES.
LEFT HAND RA
LEFT HAND RA
• Hmfk-Solid or Hmfk-GlASS door kit
• Hmfk-CmbCH-1 oil Combustion/Heat exchanger
• Hmfk-fe flue extension kit (Hmf200)
• Hmfk-Wmo Wmo Thermal Safety Switch
RIgHT HAND RA
○ remove the oil flue blanking plate off the rear
furnace panel (remove 8 hex screws from the
blanking plate).
25
LEFT HAND RA REAR vIEW
W415-1013 / A / 06.05.12