Napoleon HYBRID 150 Mode D'emploi page 38

38
NOTE
Connection of solid fuel and oil fired appliances to a common chimney, see Section 5.1.4 of CSA b139-
09 and Section 5.2.7 of CAn/CSA b365-01 for conditions allowing a single chimney for wood and oil.
Common chimney must be approved for use with woodburning appliances (2100°f) (1149°C).
LEFT HAND RA CONFIGURATION (REAR VIEW)
18" (457 mm)
14"
(356 mm)
24"
(610 mm)
vENTINg FROM OIL FLUE ALWAYS INCLINES TO THE SAME SIDE OF THE FURNACE THAT THE
RIGHT HAND RA CONFIGURATION (REAR VIEW)
WOOD, WOOD/OIL FLUE
MAX 16" (406 mm)
9"
(229 mm)
(356 mm)
24"
(610 mm)
W415-1013 / A / 06.05.12
STRICTLY ADHERE TO ALL IDENTIFIED INSTALLATION CLEARANCES.
vENTINg CLEARANCE TO COMBUSTIBLES AND SERvICE CLEARANCES
WOOD, WOOD/OIL FLUE
(457 mm)
18"
MAX 16" (406 mm)
9"
(229 mm)
14"
(356 mm)
BLOWER MODULE IS MOUNTED ON.
18" (457 mm)
14"
(356 mm)
*Drawing not to scale
LEFT HAND RA CONFIGURATION (SIDE VIEW BLOWER MODULE)
18"
(457 mm)
9"
(229 mm)
24"
(610 mm)
1.25"
24"
(32 mm)
(610 mm)
*Drawing not to scale
RIGHT HAND RA CONFIGURATION (SIDE VIEW BLOWER MODULE)
14"
48"
(1219 mm)
24"
(610 mm)
NOTE: incline of oil exhaust allows access to fresh
air inlet.
WOOD, WOOD/OIL FLUE
CLEARANCE TO COMBUSTIBLES
WOOD, WOOD/OIL FLUE
CLEARANCE TO COMBUSTIBLES
48" (1219 mm)
*Drawing not to scale
18"
(457 mm)
9"
(229 mm)
24"
(610 mm)
1.25"
(32 mm)
*Drawing not to scale