Normal Mode; Single Tx Mode; Debug Mode - Honeywell IAQPoint2 Guide De Démarrage Rapide

System Programming
Tests Menu

Normal Mode

This is the system's normal (default) operation mode. When the system
is in normal mode, some values can be changed without interrupting
services. When a value has been changed in any of the menu fields,
the change will take effect upon returning to the main menu screen.

Single Tx Mode

This mode allows transmitters to be analyzed one at a time. The
controller polls only the selected device, which subsequently has its
information updated. This mode does not interfere with Event
Evaluation functions.

Debug Mode

This mode allows complete system operation to be evaluated and
tested without affecting operations (outside of debug mode). Events
are evaluated and displayed as necessary but no action is
triggered.
301C User Manual 69
M-510324
Honeywell
7/10