Honeywell IAQPoint2 Guide De Démarrage Rapide page 948

The information screen also displays icons representing certain system
functions. Here is a list of possible icons and their meaning:
Icon
BACnet is not offered with the model 96d controller unit.
BACnet is not offered with the model 96d controller unit.
Debug: Indicates whether the controller is in debug mode
(Single TX, Debug or Simulation modes). When in
simulation mode, SIM appears next to this icon.
Log: Indicates that either "Tx Logging" or "Event logging" is
enabled.
Log error: Indicates that an error occured during TX or
Event logging. All logging functions are stopped.
SDC: Indicates that an SDcard is present and functionning.
The icon "fills" (from white to black) progressively as
memory is used. A white icon indicates empty memory
and black indicates full memory.
SDC error: If this symbol persists for more than 5 seconds,
an SD card card is present but not functioning properly.
Wireless networking is not offered with the model 96d
controller unit.
Wireless networking is not offered with the model 96d
controller unit.
M-511401
8/10
Description
96d User Manual
Honeywell
System Programming
Programming Interface
21