Personal Precautions - PRO-POINT 30A PRO CUT 30 Mode D'emploi

V1.0
can displace air and lower the oxygen level causing injury or
death. Be sure the breathing air is safe (See Fumes and Gases).
3. The user can take the additional precaution of informing
another person in the work area of the potential danger, so
that person can watch for indications that the user is
suffering from oxygen deprivation.

PERSONAL PRECAUTIONS

Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2. Avoid wearing clothes or jewelry that can become
entangled with the moving parts of a tool. Keep long hair
covered or bound.
3. Remove all jewelry or metal items from your person before
welding. Metal items may connect to the plasma cutter's
electrical circuit, causing an injury or death.
4. Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected situations.
5. Support the workpiece or clamp it to a stable platform.
Holding the workpiece by hand or against your body may
lead to personal injury.
6. Do not wear any personal grooming products that are
flammable, such as hair preparations, perfume or cologne
with an alcohol base.
7. Remove any combustibles, such as butane lighters or
matches, from your person before doing any welding. Hot
welding sparks may light the matches or ignite leaking
lighter fuel.
Visit www.princessauto.com for more information
30A PRO CUT 30 PLASMA CUTTER 8784639
7