Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8784720
RESPIRATORS
1.
Respiratory protection is needed when ventilation is not
sufficient to remove welding fumes or when there is risk of
oxygen deficiency.
2.
Work in a confined space only if it is well ventilated or while
wearing an air-supplied respirator. Welding fumes and
gases can displace air and lower the oxygen level causing
injury or death. Be sure the breathing air is safe.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become
entangled with the moving parts of a tool. Keep long hair
covered or bound.
3.
Remove all jewelry or metal items from your person before
welding. Metal items may connect to the welding unit's
electrical circuit, causing an injury or death.
4. Do not overreach when operating the tool. Proper footing
and balance enables better control in
unexpected situations.
5.
Do not wear any personal grooming products that are
flammable, such as hair preparations or cologne with an
alcohol base.
SPECIFIC SAFETY PRECAUTIONS
DANGER! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
6
220V SPOT WELDER
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
