Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
1.
Disconnect the tool from the power supply before making
any adjustments, changing accessories, cleaning, servicing
or when storing. Such preventive safety measures reduce
the risk of starting the tool accidentally.
2.
Do not come into physical contact with the welding current
circuit. The welding current circuit includes:
2.1 The workpiece or any conductive material in contact
with it.
2.2 The ground clamp.
2.3 The electrode or welding wire;
2.4 The output terminals.
3.
Insulate yourself from the electrical current and ground
using electrical insulating mats or covers big enough to
prevent physical contact with the workpiece or ground.
4. Connect the ground clamp as close to the welding area on
the workpiece as practical to prevent welding current from
traveling along an unexpected path and causing an electric
shock or fire hazard.
4.1 An option is to attach the ground clamp to a bare
metal spot on a metal workbench. The circuit will
complete as long as the workpiece is also in full contact
with the bare metal workbench.
5.
Do not weld on damp surfaces that can transmit the
electric current without taking precautions for the welder
and bystanders. The electrode, welding head and nozzle
are electrically 'hot'.
6.
Only use insulated connectors to join welding cables.
7.
Ensure there are no contacts between the workpiece and
work area that would allow it to ground, other than through
the ground cable circuit
8.
Do not exceed the duty cycle or amperage required
for the type of welding. Excessive amperage can cause
Visit www.princessauto.com for more information
30A PRO CUT 30 PLASMA CUTTER
8784639
15
Publicité
Table des Matières
