Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8784639
CAUTION! This notice indicates a potentially hazardous
situation that may result in minor or moderate injury if proper
practices are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe
practice will result in equipment or property damage, but not
personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area
clean, well-lit and free of distractions.
2.
Remove all unnecessary people from the work area when
welding. Anyone remaining in the work area must wear the
appropriate welding safety equipment.
3.
Store tools properly in a safe and dry location. Keep tools
out of the reach of children.
4. Do not weld on damp surfaces that can transmit the
electric current.
5.
Do not install or use in the presence of flammable gases,
dust or liquids.
6.
Welding sparks and ejected molten slag can start a fire.
Remove combustible materials within 39 ft (12 metres) of
the plasma cutter. See Fire and Explosion Precautions.
7.
Have a fire extinguisher readily available (see Fire and
Explosion Precautions).
8.
Use protective screens or barriers to protect others from flash
and glare; warn others in the area to look away from the arc.
9.
Keep the plasma cutter at least one foot from any wall or
structure.
10. Check that the work area is free from fires, sparks or hot
debris before leaving.
4
30A PRO CUT 30 PLASMA CUTTER
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
