How Do You Test Your Flotation Device Using The Manual Inflator - Mustang Survival KHIMERA PFD Manuel Du Propriétaire

HOW DO YOU TEST YOUR FLOTATION DEVICE USING THE MANUAL
INFLATOR?
Always test your flotation device in a safe manner, under controlled
conditions, and where help is readily available.
1. To test your inflatable flotation device, you will need:
- Your fully armed flotation device, and
- Rearming kit approved for your flotation device.
2. Put on the flotation device.
3. Actuate the inflation system by jerking firmly on the pull tab. The
flotation device should fully inflate within 5 seconds.
4. Get into shallow water, just deep enough that you can stand with
your head above the surface.
5. See if the flotation device will float you on your back or just slightly
back of vertical. In a relaxed floating position, verify that your
mouth is well above the water's surface. Note the effect of where
you hold your legs on how you float.
6. Get out of the water and remove the flotation device. Remove the
used CO cylinder from the flotation device inflator. Completely
2
deflate the flotation device using the oral inflator.
7. Let the flotation device dry thoroughly. REARM the flotation device
in accordance with the manufacturer's instructions!
19