Mustang Survival KHIMERA PFD Manuel Du Propriétaire page 11

PULL
PULL
FIGURE 9
PULL
FIGURE 10
4. Check fit by pinching each belt strap, just as you would a
waistband. If you can pinch the material together, tighten your
flotation device.
Do not tie or sew anything
to the outside of (or around)
your flotation device, as it may
compromise your device's ability
to inflate.
3. Each of the upper and lower
belts should be tightened.
Reach slightly backwards and
grasp both side straps of the
upper or lower belt, and pull
forward. Repeat with the other
belt.
PULL
PULL
PULL
FIGURE 11
PULL
9