Type 2000, 2002, 2012
Generalinformation
3
GENERAL INFORMATION
3.1
Contact addresses
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
3.2
Warranty
The warranty is only valid if the device is used as authorized in accordance with the specified application
conditions.
3.3
Information on the Internet
The operating instructions and data sheets for Type 2000, 2002 and 2012 can be found on the Internet at
www.burkert.com
3.4
Reengineering
Reengineering of Type 2000 and 2012 changes the spare parts. The spare part sets include all spare parts for both
valve versions. The reengineered valves are identified by the letter "R" (see the first line of the type label).
Figure 1:
Example of a type label with identification "R" for "Re-engineering"
3.5
Auxiliary materials
The following auxiliary materials are recommended for conversion and repair in these instructions:
Type of auxiliary material
Sealer and anti-seize agents
Lubricating paste
Lubricant
Liquid adhesive
International
Contact addresses are found on the final pages of the
printed operating manual.
You can also find information on the Internet under:
www.burkert.com
Flow 1 2
R
2000 A 50,0 NBR RG
G 2 P med 16 bar
Pilot 1,6 - 10 bar
00182076
W1X LU
Auxiliary materials
Silicone grease OKS 1110-3
Klüber paste UH1 96-402
Amblygon TA
Loctite 274
Identification of
re-engineered devices
Manufacturer's information
OKS Schmierstoffe GmbH
www.oks-germany.com
Klüber Lubrication München
www.klueber.de
Klüber Lubrication München
www.klueber.de
Henkel Loctite Deutschland GmbH
www.loctite.de
english
7