Setting/Changing The Time - Pelgrim MAG592RVS/P03 Notice D'utilisation

Setting/changing the time

After connecting your appliance or after an extended power outage, 0 0 0 0 : : 0 0 0 0 flashes in the display.
To set the time
Turn the button to set the time, e.g. 6:30.
Confirm by pressing CLOCK button or START.
There is a beep to confirm that the time has been set.
To change the time
Press the clock button. The time display flashes.
Enter the new time (e.g. 7:30) by turning the selector
button.
Confirm by pressing the CLOCK button or START.
There is a beep to confirm that the new time has been
set.
Comments:
If you do not press the clock button, the time displayed is automatically saved after one
minute.
Your appliance is equipped with a save function so that the time will continue to be displayed for
one day in the event of a power outage.
To lower the brightness of the display, press and hold the
clock button for five seconds. Only the backlighting
remains activated.
Press again for five seconds to restore
the full brightness of the display.
Display
Display