Initial Use; Setting The Current Time - Pelgrim OVP436 Notice D'utilisation

OPERATION

Initial use

• Remove the packaging materials from the appliance.
• Check the appliance for damage. Do not use the appliance if it is damaged, but contact
your supplier.
• Remove the protective film.
• Clean the interior of the appliance and all the accessories with warm water and a dish
detergent. Do not use any abrasive cleaners.
• The appliance will emit a strange smell when it is used for the first time; this is normal.
Ventilate the room thoroughly during initial use.

Setting the current time

When you connect the appliance to the mains electricity for the first time, you must set the
current time.
You can set the values in the display faster by touching and holding the value adjustment
keys.
You can always set the current time by touching the timer key several times to select the
clock symbol. The time will flash in the display; touch the value adjustment keys to set
the current time.
EN 8
1. Connect the appliance to the mains electricity.
The clock symbol appears and '12:00' will flash in the display.
2. Touch the value adjustment keys to set the current time.
3. Wait for the clock symbol to disappear.
The time is set.