HHB CDR-850 Mode D'emploi page 92

92
<PRE1282>
En
ERASING (CD-RW ONLY)
All Tracks Erasing (takes approximately 3
minutes for a finalized CD-RW)
1
Load a CD-RW disc which has been recorded on.
2
Press the ERASE button twice (once to start TOC
Erasing on a finalized CD-RW disc).
÷ "ALL", "TRACK" and "ERASE?" are displayed repeatedly.
÷ The function indicator blinks orange indicating that the
recorder is in All Tracks Erasing standby mode.
÷ Do not allow more than 8 seconds to elapse after step 2 has
been performed before proceeding with step 3.
3
Press the 8 button to start the All Tracks Erasing.
÷ The function indicator lights orange and All Tracks Erasing
starts.
÷ During All Tracks Erasing of a CD-RW disc that has not be
finalized, "ALL", "TRACK" and "ERASE" blink successively.
÷ During All Tracks Erasing of a finalized CD-RW disc, "ERS*:**"
is displayed with the remaining time.
÷ All Tracks Erasing is completed in several seconds for a CD-
RW which has not been finalized.
÷ You can stop the erase process by pressing the 7 button for
10 seconds. However, if the erase operation is stopped, the
message "CHECK" "DISC" appears to indicate that the disc
has not been normally erased.
4
The recorder stops when All Tracks Erasing is
completed.
All Disc Erasing (requires recordable time
plus 5 minutes)
1
Load a CD-RW disc which has been recorded
on.
2
Press and hold the ERASE button for about 4
seconds.
÷ The display panel displays "ALL", "DISC", "ERASE?" and
"dE **:**" successively. Then the function indicator blinks
orange indicating that the recorder is in the All Disc Erasing
standby mode.
3
Press the 8 button to start the All Disc Erasing.
÷ The function indicator lights in orange and All Disc Erasing
starts.
÷ During All Disc Erasing, "dE **:**" appears while the
remaining time is displayed.
÷ You can stop the erase process by pressing the 7 button for
10 seconds. However, if the erase operation is stopped, the
message "CHECK" "DISC" appears to indicate that the disc
has not been normally erased.
4
The recorder stops when All Disc Erasing is
completed.