HHB CDR-850 Mode D'emploi page 32

R L R
AES
/EBU
DIGITAL IN BALANCED IN BALANCED OUT
DIGITAL IN DIGITAL OUT LINE IN
R L
OPTICAL COAXIAL OPTICAL COAXIAL
S/PDIF S/PDIF
LINE IN
R L
A
REC
R L
B
L
R
C
32
<PRE1282>
En
CDR-850
L
PARALLEL
AC IN
REMOTE
LINE OUT
SIGNAL
GND
R L
LINE OUT
R L
D
DAT/
PLAY
TAPE1
R L
C
CONNECTION WITH OTHER EQUIPMENT
7 Analog line signal connections.
(Before connecting this unit with other units please
remove the power connection to this unit.)
Make analog connections to analog components such as a
stereo amplifier or similar component.
A
Use the supplied audio cables to connect the unit to an
amplifier or other device, which uses an unbalanced line
connection. Connect the unit's line in sockets to the line
out (REC) sockets of the amplifier, and the unit's line out
sockets to the line in (PLAY) sockets of the amplifier.
B
Please ensure that the white plugs are used for the left (L)
sockets, and the red plugs are used for the right (R)
sockets. Make sure this is correct at both ends of the
cable.
C
Please ensure that the color of the plugs and sockets are
matched red with red and white with white.
D
After completing connections with other equipment
please ensure the power connection to the unit is
reconnected.