Playing Tracks In A Specific Order (Programmed Playback); Clearing The Entire Program; Clearing A Track From The Program; Checking The Programmed Tracks - HHB CDR-850 Mode D'emploi

7
1
4
7
10
PGM
CHECK
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
A
Press 2 times.
Appuyez 2 fois.
Pulse 2 veces.
B
C
D
108
<PRE1282>
En
OPEN/CLOSE 0
7
2 3
5 6
8 9
>10
TIME
CHECK CLEAR
CLEAR
OPEN/
CLOSE
CLEAR
CHECK
2
1
PLAYING TRACKS IN A SPECIFIC ORDER (PROGRAMMED
PLAYBACK)

Clearing the entire program

The program can be cleared with either
A Press the 7 button to stop programmed
playback, then press the 7 button again to exit
the program mode.
B Press the OPEN/CLOSE 0 button.

Clearing a track from the program

C
Press the CLEAR button on the remote control
unit.
Each press clears the last track in the program and moves
in reverse order to the beginning.
÷ If the button is pressed during programmed playback, the
tracks after the track being played can be cleared.

Checking the programmed tracks

D
Press the CHECK button on the remote control
unit.
Each press displays the track number programmed for
each step of the program.
1 Program step number.
2 Programmed track number.
÷ This operation is available in stop mode after tracks have
been programmed. If the programmed tracks are being
played, stop playback before proceeding with this operation.
÷ When the button is pressed while the last step of the
program is displayed, "00" is displayed. Press the CHECK
button again to display the first program step.
A B
or below.