Main Board Wiring Connections - Mettler Toledo IND560x Guide D'installation

3.3.3.

Main Board Wiring Connections

Once the IND560x terminal harsh enclosure is open, connections can be made to the terminal
strips on the main board as shown in Figure 3-18.
As can be seen in Figure 3-19, it is not necessary to open the panel-mount enclosure to make
these connections.
316061929 | 12 | 01/2019
Ferrite for
analog load
cell cable
Locations for
option boards
IDNet or SICSpro
connector
SW2
COM1
connector
SW1
Figure 3-18: Harsh Enclosure Connector Locations
METTLER TOLEDO IND560x Terminal Installation Manual
Analog load
cell connection
Power supply
connections
Fiber optic and
current loop
connector
W3
Digital I/O
connector
3-13