Software Applications - Mettler Toledo IND560x Guide D'installation

1.12.1.4. IND560x-PAB
The IND560x-PAB option serves as a voltage splitter for the IND560x's external NiMH battery. The
IND560x-PAB takes in the single voltage source from the external NiMH battery and splits it into the
various voltages that are required for specific functions in the IND560x. The IND560x with PAB can
only be used with the external, 8Ah NiMH battery pack, part #(s) 64060625 and 64060627.
1.12.2.

Software Applications

The following add-on software applications are available for the IND560x terminal.
•
•
•
•
•
1.12.2.1. Fill-560
The Fill-560 is a special application that can be added to the IND560x terminal to provide material
filling and dosing control for up to four materials. It provides control for the following combinations
of weigh-in and weigh-out sequences.
Additional information can be found in the Fill-560 Technical Manual on the documentation CD
included with the Fill-560 option.
1.12.2.2. FillPlus
FillPlus is an add-on program created for the Fill-560 application. Like Fill-560, FillPlus is a special
application that can be added to the IND560x terminal to provide filling and dosing control for up to
4 materials.
FillPlus provides a formula management and storage program that adds the following features to
the Fill-560 application software:
•
1-16 METTLER TOLEDO IND560x Terminal Installation Manual
NOTE: Due to space limitations and battery life limitations, the IND560x-PAB (Power Adapter
Board) can only be used with the Harsh/Analog version of the IND560x. The IND560x-PAB will
not work with any panel mount or IDNet or SICSpro models of the IND560x. The IND560x-PAB
and external NiMH battery pack will also not support the Active-Active I/O option.
Fill-560 (filling and dosing application)
Fill-Plus (standard Fill-560 with a simple formula management add-on application)
Drive-560 (simple vehicle management application)
COM-560 (legacy host protocol application)
TaskExpert (custom programming capability)
• Fill only
• Fill and dump
• Dose out only
•
Fill and dose out
Only one formula can be structured at a time. Once a change is made to any formula, its
previous configuration is lost.
Storage of up to 25 multiple material formulas
• Blend only
• Blend and dump
• Blend and dose out
316061929 | 12 | 01/2019