Gecko Aeware in.clear Mode D'emploi page 44

in.clear
™
It is important to empty the spa every sixty days.
The in.clear water sanitation system (with BROMITRON BROMINE
GENERATOR) is for spa use only and is not to be used in swimming
pools. It is important to know how many U.S. gallons of water it takes to
fill your spa. The water capacity is usually listed on the spa and is always
in the spa information book. If you cannot determine the number of
U.S. gallons, call your spa dealer, this information is essential to the
proper use of your spa. As the water passes through the in.clear water
sanitation system (with BROMITRON BROMINE GENERATOR) a low-
voltage current electrolytically reduces the bromide ions to bromine,
which reacts with the water molecules to form free bromine. Bromine
is known to be a very effective bactericide and algaecide. This process
releases bromide ions back into the water for continuous recycling
until the BromiCharge is emptied from the spa.
When BromiCharge is added to a spa the water, it separates into
sodium ions and bromide ions. BromiCharge can be added anywhere
in the spa by simply dumping it from the container.
Do not breathe or get into your eyes. First Aid instructions are on
the BromiCharge container.
1. Upon initial filling of your spa, allow the water to circulate for
one minute or so, before adding the BromiCharge. Always
refill the spa with "new" water out of the tap before starting to use
BromiCharge.
2. BromiCharge is designed for use with the in.clear water
sanitation system (with BROMITRON BROMINE GENERATOR)
and your warranty will be void if another product is used as a
substitute.
FOR HEALTH PURPOSES DO NOT USE A SUBSTITUTE!
Add 1440 PPM of BromiCharge to the spa water.
(1.2 lbs per 100 U.S. gallons)
For example if the spa were 300 U.S. gallons you would add
3.6 lbs. of BromiCharge.
3. After adding the proper amount of BromiCharge, turn the
in.clear water sanitation system (with BROMITRON BROMINE
GENERATOR) on to build the bromine bank and bring it within
2-5 PPM range.
THE RECOMMENDED BROMINE LEVEL IS BETWEEN 2-5 PPM.
user guide for BromiCharge
43