Operating Modes; Maintenance Mode; Boost Mode - Gecko Aeware in.clear Mode D'emploi

in.clear
™
The in.clear system operates in two modes:
Maintenance Mode and Boost Mode

Maintenance Mode:

The primary function of the Maintenance Mode is to keep the
bromine bank levels at a stable and acceptable range when the spa
is not being used. Maintenance Mode is the "everyday" mode and
is automatically ON when the system is activated.
To maintain the residual bromine level within a normal range, the
user has to set the Maintenance Level of the in.clear system by
adjusting the value of the Maintenance Mode. The higher the value,
the more bromine generated. The recommended bromine level is
between 3 and 5 PPM.
The goal is to maintain bromine at a constant level between the
limits of 3-5 ppm when the spa is not being used or left unused for
an extended period of time. Once the proper maintenance level is
determined, keep the same setting unless the spa usage changes.
Finding the right bromine generation level is a crucial step for the
in.clear system to be stable and effective. Refer to section
"6 -Determining the proper bromine generation Maintenance
Level for my spa" for more information.
The spa filtration should be set at a minimum of 8hrs per day.
It is important to note that the in.clear system can ONLY generate
bromine when the water is circulating. If you are having problems
maintaining a stable level of bromine, or determining the proper
maintenance level for your spa, you may have to increase the daily
filtering time. Longer filtration produces a more steady level of
bromine.

Boost Mode:

The Boost Mode should be activated every time you use your
spa. Boost Mode increases the bromine generation rate to attack
pollutants in the water and helps rebuild the necessary residual
bromine in the water after each use of the spa. Pollutants are
introduced to the water by the bathers causing the bromine levels
to decrease. Activating the Boost Mode when you enter the spa
will prevent inadequate bromine levels and will regenerate your
bromine to the proper residual level.
Finding the right Boost level is another crucial step for the in.clear
system to be stable and effective. Refer to section "7 - Determining
the boost mode level for my spa".
If water quality is not good after use, only the Boost level
should be adjusted, not the Maintenance level.

operating modes

17