Frequently Asked Questions - Gecko Aeware in.clear Mode D'emploi

in.clear
™
Q1 - My spa water is cloudy /oily
A1 - If your spa becomes cloudy or oily due to bather load perform an
additional Boost and wait for 24 hours to see if conditions return
to normal. If the problem persists consult a spa/pool dealer to
have your water balanced properly.
Q2 - Does the sodium bromide evaporate?
A2 - No. Sodium bromide is only lost through splash out, leaks or
when draining your spa.
Q3 - What should I use to clean my spa?
A3 - Always use a non-sudsing cleaner found at your spa store.
Q4 - When my in.clear bromine generator is off does the sodium
bromide continue sanitizing my spa?
A4 - No, the in.clear system does not sanitize if inactive. If there is a
residual bank of bromine, bromine continues to sanitize the spa
water. In.clear may be OFF at certain times and the spa will still be
fine and clean.
The sodium bromide is converted to bromine as it passes through
the electrodes of the in.clear system and the pump associated
with the in.clear is running.

frequently asked questions

31