Gecko Aeware in.clear Mode D'emploi page 26

in.clear
™
Maintenance Adjustment
Press and hold the Prog key for
2 seconds to enter Maintenance
level adjustment mode
Use the +/- keys to adjust
maintenance level
Press the Prog key again to enter
Diagnostic Mode. This mode may
be used to monitor the sodium
bromide level of your spa and
may be a useful tool to use when
adding sodium bromide (such as
BromiCharge) to
the water. See details next page.
+ / -
Keys
Maintenance level adjustment
changes the rate at which
bromine will be released into
the spa water. The bromine
generation rate ranges from 1 to
50, where 1 corresponds to the
system's minimum generating
rate and 50 corresponds to
the maximum generation rate
allowed by the system.
Changing the water
temperature setpoint of your
spa, or using the economy
mode, could require a change
in the maintenance level of
your in.clear. Lower water
temperatures may require a
lower maintenance level than
higher temperature setpoints.
Please check your bromine level
when changing your temperature
setpoint or using the economy
.
mode of your spa
keypad operations
Never adjust the main-
tenance level of your in.clear
without allowing at least 24
hours following the end of the
Boost period. Boost cycles allow
the residual bromine level to
stabilize. Bromine levels outside
the 3-5 PPM range may result
from pollutants following usage.
25