Connection And Start-Up - Migatronic OMEGA3 YARD 300 Guide De L'utilisateur

Connection and start-up

Warning
Read warning notice
and instruction manual
carefully prior to initial
operation and save the
information for later use.
Permissible installation
Mains connection
Connect the machine to the mains supply that it is
designed for (see type plate (U1) on the back of the
machine).
yellow/green
brown
black
grey
0
l
1
Voltage stabilisation kit
OMEGA YARD is designed for +/- 15% mains voltage
3
variation but configurable with a voltage stabilisation
kit as a safeguard against larger voltage variations,
e.g. in case of generator use.
Important!
In order to avoid destruction
of plugs and cables, good
electric contact is required
when connecting earth cable
and welding hose to the
machine.
3x400V
3x208-440V (boost)
L1
L2
L3
N
2
10.
Lifting instructions
The OMEGA
handle by a crane.
1. Mains supply
2. Power switch
3. Connection of shielding gas
4. Connection of welding hose (standard) and
electrode holder with adapter for MMA (optional equipment)
5. Connection of remote control unit (optional)
6. Connection of earth clamp
7. CAN connection (optional equipment)
8. Protective frame (optional equipment)
9. Wheel kit (optional equipment)
Trolley (optional equipment)
YARD can be lifted in the
3
13
2
1
4
5
6
F
Power
F
F
GAS
2-6 bar
8
9
7
3
10