Migatronic OMEGA3 YARD 300 Guide De L'utilisateur page 17

Special functions
Reduction of the adjustable range for
voltage setting (synergic MIG/MAG).
Not visible on machines with Basic panel. The
adjustable range for voltage trim can be reduced by
0-50% of the synergic voltage. This feature is used if
the machine is locked in level 2 and disabled when
"---" is displayed.
Configuration of external control
I
2
61111425
5 secs
Cable compensation (calibration of resistance in welding hose)
I
61111425
IV
The surface of the workpiece must be clean to
ensure good contact with the torch
II
1
61111425
Std.
or wire feed speed (manual MIG)
Not visible on machines with Basic panel.
The adjustable range for current setting can be
reduced by 0-25% of the synergic current. This feature
is used if the machine is locked in level 2.
OFF
1 6
1 . . .7
(> 01.11.2010)
1 . . .7
(< 01.11.2010)
1 . . .7
1 . . .3
II
Factor
61111425
V
61111425
17
Reduction of the adjustable range for
current setting (MMA and synergic MIG/MAG)
III
option
option
option
option
option
III
VI
61111425
61111425