Connection And Start-Up; On/Off Switch - Migatronic GREEN POINTER X2 Guide De L'utilisateur

Connection and start-up

Warning
It is very important that the user
reads and understands the contents
of this instruction manual.
Worn-out electrical equipment and batteries
must be separately collected and handed over for
reuse according to EU-directive 2012/19/EU and
EUdirective 2006/66/EU. Dispose of the product
according to local standards and regulations.
More information can be found under Policies at
www.migatronic.com
Manufacturers recommended use
Green Pointer X2 has been designed for the sole purpose
of grinding tungsten electrodes. Any use, which is not
described in this manual, is strictly prohibited.
Safety
• Check that the machine is undamaged.
• Do not use the machine without the filter.
• Change the filter in accordance with the instruction
manual.
• Only turn the machine on when the electrode holder is in
the grinding chamber.
• Do not remove the electrode holder before the motor has
come to a complete stop.
• Correct and adjust possible defects.
• Repairs and maintenance must only be carried out by
authorised personnel.
• Do not use the machine in humid places.
• Only use original replacement parts.
• Unplug the machine from the mains supply before any
maintenance work is undertaken.
Drawing & parts description
Electrode
6
holder guide
Eccentric plate to
select grinding 20
position
Grinding head
2
Depth
12
setting gauge
Allen screw to
tighten the
15
grinding head
Mains cable
1.2
Inspection cover
29
Allen screw
19
5
Electrode holder
7
Angle degree scale
(1 step = 5°)
Filter housing
25
Filter cassette
26
Filter cover
25.2
Machine number
Allen screw
25.3
to fix the
filter cover
Motor
1
Adjustment of
turning speed
Diamond
3
wheel
Grinding
14
stop
Knurled
22
wheel
On/Off
1.1
switch
Part Nos. for
electrode clamps
16.1 for 1.0 mm
16.2 for 1.6 mm
16.3 for 2.0 mm
16.4 for 2.4 mm
16.5 for 3.2 mm
16.6 for 4.0 mm
Electrode
clamp
14
Stop