Lowenstein Medical Allegra M30 Mode D'emploi page 31

3 Operation
2. Fold the moving part of the secretion canister lid downwards so that the
hooks snap into place and the secretion canister is securely closed.
Fig. 5
EN
60
3. Insert the bacterial filter into the device by introducing the filter with the
lever pointing vertically downwards in the opening provided. Subsequently
move the lever a quarter turn clockwise so that the lever is in the horizontal
position afterwards.
Fig. 6
Fig. 7
Please note that the reusable secretion canister cannot be connected
if the bacterial filter has not been inserted correctly.
4. Insert the secretion canister into the canister fitting provided on the device
by guiding it over the rack on the bottom and pivoting it into the device
until it snaps into place.
Fig. 8
Fig. 9
3 Operation
5. Connect the suction tube to the port in the middle of the secretion canister
lid. In doing so, ensure that the tube is fixed sufficiently tight.
Fig. 10
6. Connect the other ending of the suction tube to the aspiration catheter
with the aid of a fingertip.
EN
61