Using The Outputs And An Optional Footswitch - Roland EXR-46 OR Manuel D'utilisation

16. Using the outputs and an optional footswitch

If you like, you can also record your performance (or a Recorder songs) to cassette, MD, etc. To this end, you need to connect the EXR-46 OR's OUTPUT sockets to the external device's REC IN jacks.
Use a standard 1/4" phone cable for doing so. Another use for
these outputs is to connect the EXR-46 OR to your HiFi or key-
board amplifier (such as the Roland KC-550/350/150). Using a
HiFi amplifier requires the use of an adapter plug (RCA/phono→
1/4" jack). If you like, you can also purchase two Roland PJ-1M
cables.
Note: By connecting the OUTPUT jacks, you do not switch off the
EXR-46 OR's amplification system.
You can connect an optional DP-2, DP-6, or BOSS FS-5U foot
switch to the FOOTSWITCH jack in order to hold the notes even
after releasing the keys, or to perform other functions (see
p. 40).
Cassette deck, power amplifier, HiFi amplifier, MA series active
speakers, etc.
DP-2, DP-6, or BOSS FS-5U footswitch
EXR-46 OR
57