Balance - Roland EXR-46 OR Manuel D'utilisation

r EXR-46 OR
The corresponding icon appears in the display (only
one of them can be displayed at any one time).
Note: Immediately after switching on the EXR-46 OR, the
Orchestrator selects the "FULL BAND" level.
Note: The effect of these three levels also depends on whether
the [VARIATION] or [ORIGINAL] button was pressed. In effect, the
combination of the [ORIGINAL]/[VARIATION] and [DRUM&BASS]/
[COMBO]/[FULL¥BAND] buttons provides 6 accompaniment pat-
terns per Music Style (3 x 2).
The last selection you make can be saved to a User Program.
See p. 45.
18

Balance

The BALANCE [√][®] buttons allow you to change the volume
balance between the Arranger (or Song) parts and the Keyboard
parts (the ones you can play yourself).
(1) Press BALANCE [ACCOMP] if the Arranger (or Song parts)
are too soft.
BALANCE
ACCOMP KEYBOARD
Balance
a10
(2) Press BALANCE [KEYBOARD] if you think your solo playing
should be louder.
By holding down [SPLIT] (or [DUAL]) while pressing these
buttons, you can modify the volume of those Keyboard
parts.
Note: See p. 41 for setting the volume of individual parts.
80
=