Users; Alarm Message And Call Block; Alarm Message And Call Block Sending Mode - Elkron MP500/4N Mode D'emploi

1.10.5

Users

MP500/4N MP500/8
Installer Installer
Tech. Manager Tech. Manager
Master Master
User 2 User 2
User 3 User 3
User ... User ...
User 14 User ...
User 30
--
--
MP500/4N MP500/8
HOLD UP HOLD UP
1.11

ALARM MESSAGE AND CALL BLOCK

1.11.1

Alarm message and call block sending mode

On , MP500/8 and MP500/16 control panels, starting from control panel SW version 1.01 and
MP500/4N
version 1.03, has been added the option to select between two alarm message sending modes:
•
Mode 1 (available on SW versions prior to 1.01 and compliant with EN50131 grade 2 and grade 3)
•
Mode 2 (not compliant with EN50131 grade 2 and grade 3)
Proceed as follows to program the alarm message sending mode:
1) Enter <Installer code>, press
appears.
2) Press and then
3) Press and finally
4) Press .
5) Press and to select the alarm sending Mode. Press
6) Press repeatedly to exit from the menu.
On control panels with SW version prior to 1.01, the sending Mode selection menu is not available,
Mode 1 is only available.
MP500/16
Installer
Tech. Manager
Master
User 2
User 3
User ...
User ...
User 30
User ...
User 62
MP500/16
HOLD UP
, then and finally
several times until ADVANCED appears.
repeatedly until SENDING MODE appears.
Default Name
000000
Installer
222222
Tech. Manager
111111
Master
000020
...
000030
...
000...
...
000140
...
000300
...
000...
...
000620
...
Default
Disabled
repeatedly until TELEPHONE DIALER
to confirm.
MP500/4N-8-16
Assigned
Enabled
partitions
Power ON SYSTEM
-- SYSTEM
Always SYSTEM
--- 1
--- 1
--- 1
--- 1
--- 1
--- 1
--- 1
starting from
UT00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
ADVANCED
ADVANCED
SENDING MODE
SENDING MODE
MODE 1
MP500/16
12/01/2014 10:10
keypad SW
49