Technical Characteristics - B.A. International PS20 Notice D'instruction

A poorly maintained instrument may overheat and cause unusually severe
burns.
If you have any questions on the device, also contact your approved
distributor or B.A. International. No alterations or additions to the device
should be made without the express consent of B.A. International.
Only use accessories provided for this device. Do not use accessories for
this contra-angle on any other type or make of contra-angle or on any
other device.

4. TECHNICAL CHARACTERISTICS

(*) Values for information.
If a longer and wider rotating instrument is used, the user is responsible
for choosing the right operating conditions to prevent any risks to patients
or third parties.
4
Rate of reduction / multiplication
Color
Adjustable stop system
Weight (g)
Tool fixing system
Motor connection standard
Maximum motor speed (rpm)
Maximum torque for motor N/cm
Max. torque for instrument N/cm
Tool type as per NF EN ISO 1797-1
Diameter of tools (mm) as per NF EN ISO 1797-1
Max. length recommended by B.A. (mm)
Max. diameter of active tool part,
recommended by B.A. (mm)
Spray water flow (ml/mm)
PS20 PS20P
20:1
Green
Non Non
84 84
w/ push
w/ latch
button
ISO 3964
40 000
7
50 55
Type 1
2,35
50
*
10
*
> 50