Description; Components; Function - Speck pumpen BADU Jet Wave Traduction Des Instructions D'utilisation D'origine

3

Description

3.1

Components

Fig. 1
(1) Main housing
(38/1) Pneumatic button
pump
(54/1) Nozzle
3.2

Function

The pump is connected via the suction and pressure line with the
plastic main housing (1). The pump is switched ON/OFF with the
pneumatic button (38/1). The pool water is sucked in by the pump
via the housing with a low flow rate and pumped back into the
pool under high pressure through the nozzles (54/1). The flow rate
and therefore the efficiency of the counter swim unit can be set
using the adjustable nozzle (54/1). Air can also optionally be
mixed into the flow from the nozzle with the air regulator (21/1).
The unit is also equipped with underwater LED lighting for effect
lighting. This can be turned ON/OFF using the pneumatic button
(38/2).
01|2018
(1)
WG23.70.061-P
(54/1)
(38/1)
(21/1)
(38/2)
(21/1) Air regulator
(38/2) Pneumatic button light
Description
EN 15