Gas Control Valve
1. Disconnect the heater from it's power source.
2. Remove the gas supply hose and hose adapter from
the heater's gas inlet. See Fig. 23, Premier 40 shown.
FIG. 23
Heater Gas Inlet
Hose Swivel Nut
3. Open the door to gain access to the components.
4. Remove the brown and green wires attached at the top
of the gas valve.
5. Remove the brass compression nut securing the stain-
the heater's base.
bracket.
6. Remove the gas valve from the heater.
Burner Orifice
1. Remove the brass compression nut from the elbow of
the burner bracket. See Fig. 24.
Hose Adapter
Owner's Manual • Premier Ductable Heater
Premier Ductable Heater
FIG. 24
Compression
Nut
1. Remove the brass compression nut securing the stain-
holder.
holder and burner casting to the base. See Fig. 26,
Premier 170 DF shown.
FIG. 25
Hairpin
Clip
Bolt
21