Actuator Characteristics; Actuator Connectors And Controls - Erreka FENIX Manuel De L'utilisateur

2

ACTUATOR CHARACTERISTICS

Technical characteristics
Power supply (Vac/Hz)
Consumed power (kW)
Motor voltage (Vdc)
Protection grade (IP)
Maximum force (N)
Service temperature (ºC)
Weight without track (kg)
Use
3

ACTUATOR CONNECTORS AND CONTROLS

Control panel
1 Indicator light
2 Connection terminal
3 Display
Button |+
4
Button |-
5
6 CODE button
7 SET button
Indicator light
The indicator light remains on during the opening and
closing operations.
Once the door has halted, the light remains on for
around 3 minutes. Once this time has passed, it goes off
automatically.
It flashes before starting the closing operation in
automatic mode.
FESR80E FESR80EM
230/50-60 125/50-60
0.25
0.25
24
20
800
-20/ +60
4.5
Residential
DESCRIPTION OF THE PRODUCT
The FENIX actuator is an overhead actuator with an
integrated control panel.
Constructed to form part of an automation system of
sectional doors and tilting doors with a single leaf
(counterweighted or with torsion spring).
It allows the implementation of a soft-stop system, in
which the speed slows down at the end of opening and
closing operations.
It has opening and closing force limitation.
Connectors

To complete the connections, see "Connect the
actuator to the rest of the installation elements" on
page 59.
Display
Instructions during operation:
h
Automatic mode operation
H
Semi-automatic mode operation
Instructions during programming:

See "Starting up and programming" on page 60.
Button |+
• Starts and halts the opening of the door.
• Gives access to the programming of parameters (see
"Programming sequence" on page 60).
Button |-
• Starts and halts the closing of the door.
• During programming, it allows the values of the
parameters to be selected.
CODE button
• Starts the recording of the radio code (remote
control).
SET button
• Allows the door travel to be recorded (see"Door
open/close programming" on page 61 ).
49
FENIX Overhead Actuator