Procedure
Mark the assembly points
Position the front track support
Position the door anchoring
See "Assembly positions and levels" on page 54.
1 Mark the points to mount the front support (1), the
door anchoring (2) and the overhead strips (3).
1 Choose screws which are suitable for the place of
attachment (metal, brick, wood, etc) and the weight
and effort of the actuator.
Use appropriate screws.
2 Make the holes in the marked points.
3 Attach the support.
1 Make holes for the attachment screws in the
marked anchoring points.
2 Position the anchoring in the door using the screws
(1).
Use appropriate screws, in line with the
material of the door.
INSTALLATION
55
FENIX Overhead Actuator