Unpacking And Content; Unpacking - Erreka FENIX Manuel De L'utilisateur

UNPACKING AND CONTENT

1

UNPACKING

The complete product is supplied in two packages:
• A box containing the actuator and the components
described in "Content" on page 52.
• A package containing the track and the other
components necessary for installation
(3m track: ref. AFE01; 4m track: ref. AFE02).
2
CONTENT
1 Actuator
2 Chain protector
3 Overhead strips
4 Anchoring for sectional door
Fig. 3 Content of the actuator package
52
Installation Manual
1 Open the package and carefully remove the
contents from within.
}
Discard the packaging in an environmentally
friendly manner, using recycling containers.

Do not leave the packaging within the reach
of children or handicapped people, as it may
cause injury.
2 Check the content of the package (see figure
below).

Should it be noticed that a piece is missing or
deteriorated, contact the nearest technical service.
5 Front support
6 Bag of screws
7 Rear flanges
8 Curved drag arm