Starter (Choke) Cable Free Play Adjustment; Exhaust System Inspection - Yamaha VX700F Manuel D'atelier

STARTER (CHOKE) CABLE FREE PLAY ADJUSTMENT/

EXHAUST SYSTEM INSPECTION

STARTER (CHOKE) CABLE FREE PLAY
ADJUSTMENT
1. Measure:
•
Starter cable free play a
Out of specification → Adjust.
SCH2340 2. Adjust:
•
Starter cable free play
Adjustment steps:
•
Loosen the locknut 1.
•
Turn the adjusting nut 2 in or out until the
specified free play is obtained.
Turning in → Free play is increased.
Turning out → Free play is decreased.
•
Tighten the locknut.
EXHAUST SYSTEM INSPECTION
1. Open the shroud.
2. Remove:
•
Springs
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
3. Inspect:
•
Exhaust joint 1
•
Exhaust pipe 2
•
Exhaust silencer 3
Cracks/damage → Replace.
•
Gasket 1 4
•
Gasket 2 5
•
Gasket 3 6
Exhaust gas leaks → Replace.
4. Check:
•
Tightening torque 7
SCH2350
5. Install:
•
Springs
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
2-15
INSP
ADJ
Starter cable free play a:
0.5 ~ 1.5 mm (0.02 ~ 0.06 in)
Bolt (exhaust joint) 7:
1st:
18 Nm (1.8 m · kg, 13 ft · lb)
2nd:
27 Nm (2.7 m · kg, 19 ft · lb)