ENGINE IDLE SPEED ADJUSTMENT/
THROTTLE CABLE FREE PLAY ADJUSTMENT
SCH2300
SCH2310
ENGINE IDLE SPEED ADJUSTMENT
1. Adjust:
•
Engine idle speed
Adjustment steps:
•
Start the engine and let it warm up.
•
Turn the throttle stop screw 1 in or out until the
specified engine idle speed is obtained.
Turning in → Idle speed is increased.
Turning out → Idle speed is decreased.
Engine idle speed:
1,600 ± 100 r/min
NOTE:
After adjusting the engine idle speed, the throttle
cable free play should be adjusted.
THROTTLE CABLE FREE PLAY
ADJUSTMENT
NOTE:
•
Before adjusting the throttle cable free play, the
engine idle speed should be adjusted.
•
Adjust the throttle cable free play while the cable is
in the cable guide.
1. Measure:
•
Throttle cable free play a
Out of specification → Adjust.
Throttle cable free play a:
1.0 ~ 2.0 mm (0.04 ~ 0.08 in)
2-13
INSP
ADJ