Assembly - Yamaha VX700F Manuel D'atelier

PRIMARY SHEAVE AND DRIVE V-BELT
SCH4150
a
b
SCH4160
SCH4170
SCH4180

ASSEMBLY

1. Install:
•
Sliding sheave
(onto the spider)
NOTE:
Be sure the sliding sheave match mark (X) is aligned
with the spider match mark (X).
2. Install:
•
Fixed sheave
(onto the spider)
NOTE:
•
Clean the threads.
•
®
Apply LOCTITE
shown.
CAUTION:
®
LOCTITE should be applied only to the specified
area. Never apply it to the bushings and other
areas.
a 16 mm (0.63 in)
b 30 ~ 35 mm (1.18 ~ 1.38 in)
3. Install:
•
Fixed sheave stoppers 1
NOTE:
Stopper tapered portion should face fixed sheave.
4. Tighten:
•
Spider
Tightening steps:
•
Finger-tighten the spider until it is stopped by the
fixed sheave stopper.
•
Hold the fixed sheave with the clutch spider
separator 1.
Clutch spider separator:
90890-01711, YS-28890-B
NOTE:
Securely fit the projections on the clutch separator
adapter 2 into the fixed sheave holes.
4-7
POWR
TR
#648 to the fixed sheave as