Putting The Lamp Into Place - Robert Juliat D'ARTAGNAN 930 SNX Dossier Technique

PUTTING THE LAMP INTO PLACE.

User's precautions :
- Disconnect from the mains.
- Lamp is cold.
- Avoid touching the bulb of the lamp.
- Open the lamp house's bonnet.
- Open the socket jaws by unscrewing 1 .
- Place the lamp into the socket.
- Retighten the socket jaws by using the knob 1 .
For means of security, each time the lamp is changed, it
is recommended to check the condition of the socket
connections: the base of the lamp - socket jaws. A socket or the
base of a lamp which has become black, requires replacement.
Otherwise, damage will be caused to important parts of the
lantern (i.e. ignitor).
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr
TECHNICAL FILE
2500W MSR PROFILES
WARNING : Fragile lamp - take the lamp out from the
lamp housing, when transporting the lighting unit.
900 SNX
Section A - 7
1